PRODUCTOS



+
  • hls_015.jpg

Rotary Lobe Pump

Artículo No.:

HLS_012


Resumen

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product

Palabras Clave: Bomba Lobular Rotativa


Mensaje

Detalle del producto


  • Description
  • Performance
  • Parameters
    • Nombre del producto: Rotary Lobe Pump
    • Código de producto: HLS_012

    The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product

    Product introduction:

    The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product. According to years of research and experience accumulation, it has determined a series of rotor pumps under different working conditions: chemical type, food type, general type, etc When conveying different media, the product adopts the corresponding configuration, which makes the rotor pump play the characteristics of stability, efficiency and safety in a variety of different application conditions, and provides the majority of users with the solution of fluid transportation in line with the requirements of the actual working conditions.

     

    HLS


    working principle:

    When the two rotors rotate in the opposite direction synchronously, the volume cavity periodically changes from small to large - from large to small to achieve the purpose of conveying fluid. The flow rate of the pump depends on the volume of the working chamber and its changing frequency in unit time, but (theoretically) has nothing to do with the discharge pressure; Driven by the transmission shaft, two rotors (rotor blades are 1-8) rotate in the opposite direction synchronously. In the process of rotation, the volume at the inlet increases from small to large to produce suction (vacuum degree) to absorb materials. After that, the two rotors and the pump cavity form a fixed volume cavity, and the volume at the outlet of the pump decreases from large to small to output materials, forming a higher vacuum degree and conveying pressure.

     

    Application fields:

    *Daily chemical: detergent, washing liquid, shower gel, skin care cream, shampoo, hand sanitizer, toothpaste, soap, detergent slurry, daily chemical raw materials, etc.

    *Fine chemicals: dyes, pigments, adhesives, silicone oil, leather oil, chemical additives, various colloidal materials, various sizes, etc.

    *Food: chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated fruit juice, jam, ice cream, milk, yeast slurry, pulp, jelly, condiment, distiller's grains, soybean protein, flour slurry, etc.

    *Papermaking: polyacrylamide (PAM), gelatinized starch, carboxyl styrene butadiene / styrene butadiene latex, rosin, rosin size, filler, dry strength agent, wet strength agent, sizing agent, retention and drainage aid, defoamer, coating, water treatment chemicals, etc.

    *Chemical fiber: viscose pulp porridge, PVA, vinylon size, acrylic size, polyamide size, polyester chip, polypropylene, man-made fiber, functional fiber, etc.

    * medicine: all kinds of ointment, extract, medicine emulsion, pill paste, syrup, health products, medicament and so on.

    *Coatings: Paints, coatings, inks, insulating paints, resins, additives, organic solvents, etc.

     

    HLS

  • Product features:

    There is a certain gap between the rotor and the pump body, between the rotor and the rotor, no contact, no friction, long service life.

    No need to dismantle the pipe, open the pump cover to repair, convenient maintenance and cleaning, less vulnerable parts.

    Low energy loss, high efficiency, low failure rate, reliable sealing and low noise. It can transport high viscosity, high concentration, containing soft solid particles and other materials with poor fluidity.

    The output flow of the pump can be changed within a certain range by adjusting the pump speed, and can be used as a general metering pump.

    It can be equipped with flange type, screw type, clamp type and other types of connection, and the in and out direction can be horizontal or vertical.

    It can transport gas, liquid and solid mixed materials and transport a wide range of materials. Built in thermal insulation cooling structure design, good thermal conductivity, easy installation. It can be equipped with sanitary safety valve and pump valve, and the pressure overload protection of pipeline system is simpler.

    The rotor and pump cavity can transport the medium containing solid particles such as sludge and sewage after using special materials and technology.

    How to actively eliminate the common faults of high viscosity pump to ensure the following aspects: 1. Single butterfly rotor pump manufacturers have no total flow or lack of water yield. When the speed ratio of high viscosity pump is too low, it will cause the lack of water yield. This kind of situation is often caused by the installation deviation of pump or the lack of output power. At this time should check the gear pump practice speed ratio, pump and electrical connection and output power matching. 2. No inlet and outlet pressure or lack of pressure, gear pump can not produce pressure, it only outputs the total flow. Low pressure or no pressure indicates that the high viscosity pump does not suck liquid or leaks seriously. When the power of the electric pump is too small, the exhaust volume of the gear pump is too large or the pressure is too high, there will also be a lack of pressure. Naturally, when the pressure gauge is damaged or the saving hole of the pressure gauge is blocked, there is no pressure. At this time, a new pressure gauge can be refitted for inspection. 3. Micro rotor pump appears abnormal vibration and noise, because the viscosity of the material in the low viscosity gear pump is high, so it can easily produce suction condition and arouse a lot of noise.

  • HLS


PRODUCTOS PRINCIPALES

EXPLORA NUESTRA LÍNEA DE PRODUCTOS


图片名称

Rotary Lobe Pump

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Aprende más +
图片名称

Rotary Lobe Pump

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Aprende más +
图片名称

Rotary Lobe Pump

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Aprende más +
图片名称

Rotary Lobe Pump

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Aprende más +

Mensaje en línea


Gracias por su atención a Helsh-Tech, si tiene algún comentario o sugerencia, por favor déjenos un mensaje.

Enviar