Categoria de producto
Rotary Lobe Pump
Artículo No.:
HLS_002
Resumen
Palabras Clave: Bomba Lobular Rotativa、
Detalle del producto
- Description
- Performance
- Parameters
-
- Nombre del producto: Rotary Lobe Pump
- Código de producto: HLS_002
The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.
Product introduction:
The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product. According to years of research and experience accumulation, it has determined a series of rotor pumps under different working conditions: chemical type, food type, general type, etc When conveying different media, the product adopts the corresponding configuration, which makes the rotor pump play the characteristics of stability, efficiency and safety in a variety of different application conditions, and provides the majority of users with the solution of fluid transportation in line with the requirements of the actual working conditions.
working principle:When the two rotors rotate in the opposite direction synchronously, the volume cavity periodically changes from small to large - from large to small to achieve the purpose of conveying fluid. The flow rate of the pump depends on the volume of the working chamber and its changing frequency in unit time, but (theoretically) has nothing to do with the discharge pressure; Driven by the transmission shaft, two rotors (rotor blades are 1-8) rotate in the opposite direction synchronously. In the process of rotation, the volume at the inlet increases from small to large to produce suction (vacuum degree) to absorb materials. After that, the two rotors and the pump cavity form a fixed volume cavity, and the volume at the outlet of the pump decreases from large to small to output materials, forming a higher vacuum degree and conveying pressure.
Application fields:
*Daily chemical: detergent, washing liquid, shower gel, skin care cream, shampoo, hand sanitizer, toothpaste, soap, detergent slurry, daily chemical raw materials, etc.
*Fine chemicals: dyes, pigments, adhesives, silicone oil, leather oil, chemical additives, various colloidal materials, various sizes, etc.
*Food: chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated fruit juice, jam, ice cream, milk, yeast slurry, pulp, jelly, condiment, distiller's grains, soybean protein, flour slurry, etc.
*Papermaking: polyacrylamide (PAM), gelatinized starch, carboxyl styrene butadiene / styrene butadiene latex, rosin, rosin size, filler, dry strength agent, wet strength agent, sizing agent, retention and drainage aid, defoamer, coating, water treatment chemicals, etc.
*Chemical fiber: viscose pulp porridge, PVA, vinylon size, acrylic size, polyamide size, polyester chip, polypropylene, man-made fiber, functional fiber, etc.
* medicine: all kinds of ointment, extract, medicine emulsion, pill paste, syrup, health products, medicament and so on.
*Coatings: Paints, coatings, inks, insulating paints, resins, additives, organic solvents, etc.
-
Product features:
There is a certain gap between the rotor and the pump body, between the rotor and the rotor, no contact, no friction, long service life.
No need to dismantle the pipe, open the pump cover to repair, convenient maintenance and cleaning, less vulnerable parts.
Low energy loss, high efficiency, low failure rate, reliable sealing and low noise. It can transport high viscosity, high concentration, containing soft solid particles and other materials with poor fluidity.
The output flow of the pump can be changed within a certain range by adjusting the pump speed, and can be used as a general metering pump.
It can be equipped with flange type, screw type, clamp type and other types of connection, and the in and out direction can be horizontal or vertical.
It can transport gas, liquid and solid mixed materials and transport a wide range of materials. Built in thermal insulation cooling structure design, good thermal conductivity, easy installation. It can be equipped with sanitary safety valve and pump valve, and the pressure overload protection of pipeline system is simpler.
The rotor and pump cavity can transport the medium containing solid particles such as sludge and sewage after using special materials and technology.
The basic principle of screw rotor pump manufacturer magnetic coupling drive system pump (commonly known as fluoroplastic magnetic pump) is integrated into the application standard of high vacuum pump, which is difficult for mechanical seal, so that the stability and rationality of the magnetic pump have been greatly improved. The investigation of availability and maintainability of magnetic pump and mechanical seal pump shows that the loss rate and equipment failure rate of sealed pump are significantly higher than magnetic pump. For example, the average life of the mechanical seal on the hot liquid pump at 400 ℃ is 6 months, while the magnetic pump can run for many years. The only necessary maintenance is to lubricate the external rolling bearings of the pump and motor. A lot of work experience in the chemical plant industry has made us get the result: the development trend of magnetic pump has already become the solution of economic development in many steps of equipment. Therefore, the increase of magnetic pump application is not only due to a reliable environmental factor, but also to the economic development factor of greatly reducing the operation and maintenance costs. Its application scope has expanded from conveying harmful liquid and precious liquid to the general pump places with long service life and less maintenance. For example, magnetic pump is used to transport cold water for air conditioning unit on ocean going ships due to high maintenance cost. In recent ten years, the application of swing rotor pump has been greatly improved, and it has already become a common weapon in various application fields. Magnetic pump can now reach 90% of all application fields of sealless pump.
-
PRODUCTOS PRINCIPALES
EXPLORA NUESTRA LÍNEA DE PRODUCTOS

Rotary Lobe Pump
The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.
Aprende más +
Rotary Lobe Pump
The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.
Aprende más +
Rotary Lobe Pump
The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.
Aprende más +
Rotary Lobe Pump
The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.
Aprende más +