Categoria de producto

Rotary Lobe Pump

Artículo No.：

HLS_006

Resumen

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Palabras Clave: Bomba Lobular Rotativa、

TEL：

+86-574-86906070

TEL/Whatsapp/Wechat：

+8613656885558

E-mail：

hls@helsh-tech.com

Detalle del producto

Description
Performance
Parameters

- Nombre del producto: Rotary Lobe Pump
- Código de producto: HLS_006
The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Product introduction:

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product. According to years of research and experience accumulation, it has determined a series of rotor pumps under different working conditions: chemical type, food type, general type, etc When conveying different media, the product adopts the corresponding configuration, which makes the rotor pump play the characteristics of stability, efficiency and safety in a variety of different application conditions, and provides the majority of users with the solution of fluid transportation in line with the requirements of the actual working conditions.

working principle:

When the two rotors rotate in the opposite direction synchronously, the volume cavity periodically changes from small to large - from large to small to achieve the purpose of conveying fluid. The flow rate of the pump depends on the volume of the working chamber and its changing frequency in unit time, but (theoretically) has nothing to do with the discharge pressure; Driven by the transmission shaft, two rotors (rotor blades are 1-8) rotate in the opposite direction synchronously. In the process of rotation, the volume at the inlet increases from small to large to produce suction (vacuum degree) to absorb materials. After that, the two rotors and the pump cavity form a fixed volume cavity, and the volume at the outlet of the pump decreases from large to small to output materials, forming a higher vacuum degree and conveying pressure.

Application fields:

*Daily chemical: detergent, washing liquid, shower gel, skin care cream, shampoo, hand sanitizer, toothpaste, soap, detergent slurry, daily chemical raw materials, etc.

*Fine chemicals: dyes, pigments, adhesives, silicone oil, leather oil, chemical additives, various colloidal materials, various sizes, etc.

*Food: chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated fruit juice, jam, ice cream, milk, yeast slurry, pulp, jelly, condiment, distiller's grains, soybean protein, flour slurry, etc.

*Papermaking: polyacrylamide (PAM), gelatinized starch, carboxyl styrene butadiene / styrene butadiene latex, rosin, rosin size, filler, dry strength agent, wet strength agent, sizing agent, retention and drainage aid, defoamer, coating, water treatment chemicals, etc.

*Chemical fiber: viscose pulp porridge, PVA, vinylon size, acrylic size, polyamide size, polyester chip, polypropylene, man-made fiber, functional fiber, etc.

* medicine: all kinds of ointment, extract, medicine emulsion, pill paste, syrup, health products, medicament and so on.

*Coatings: Paints, coatings, inks, insulating paints, resins, additives, organic solvents, etc.
Product features:

There is a certain gap between the rotor and the pump body, between the rotor and the rotor, no contact, no friction, long service life.

No need to dismantle the pipe, open the pump cover to repair, convenient maintenance and cleaning, less vulnerable parts.

Low energy loss, high efficiency, low failure rate, reliable sealing and low noise. It can transport high viscosity, high concentration, containing soft solid particles and other materials with poor fluidity.

The output flow of the pump can be changed within a certain range by adjusting the pump speed, and can be used as a general metering pump.

It can be equipped with flange type, screw type, clamp type and other types of connection, and the in and out direction can be horizontal or vertical.

It can transport gas, liquid and solid mixed materials and transport a wide range of materials. Built in thermal insulation cooling structure design, good thermal conductivity, easy installation. It can be equipped with sanitary safety valve and pump valve, and the pressure overload protection of pipeline system is simpler.

The rotor and pump cavity can transport the medium containing solid particles such as sludge and sewage after using special materials and technology.

The standard way of daily maintenance of double rotor pump: 1. The high pressure liquid column of rotor pump reverses rapidly due to sudden power failure, and the impact is on the porous plate of the product at the outlet of rotor pump. The solution is to update the layout of the pipeline and fittings of the system software for the unscientific discharge of the rotor pump. 2. The gate valve of the outlet pipeline of the rotor pump is closed too fast. The solution is to turn off the gate valve gradually. 3. The heat quantity of the transported material on the pump cover and rolling bearing of the rotor pump is discharged by the surface layer of the pump cover and bearing seat of the rotor pump, so that the temperature of the bearing seat is integrated into the temperature of the shaft sealing characteristics. Therefore, when selecting the installation position of the rotor pump, the heat of the high-temperature oil pump cover and the bearing seat should be diffused to avoid any heat storage. 4. Because of the sudden power failure, the working pressure of the rotor pump system software fluctuates, the negative pressure of the system software is discharged, and the bubble in the dissolved liquid escapes. There is steam in the rotor pump or pipeline. The solution is to exhaust the steam. 5. Syrup rotor pump price rotor pump shutdown: switch off the power supply. Empty the liquid inside, clean and turn the motor rotor 180 degrees on time to avoid shaft deformation until the rotor pump completely stops cooling.