Categoria de producto
HCP Homogeneity Mixing Pump
Palabras Clave: Bomba Lobular Rotativa、
Detalle del producto
- Nombre del producto: HCP Homogeneity Mixing Pump
- Código de producto: HLS-E001
HCP homogeneous mixing pump has multiple feed pipes, which are discharged from one outlet after homogeneous mixing. The number of rotor stator gear plates of the homogeneous mixing pump is equipped with 2 ~ 4 layers according to different working conditions. The tooth clearance between rotor and stator of each layer is from thick to fine, so that multiple groups of feed can be mixed evenly in an instant. The product is widely used in the production process, which requires a variety of materials to be mixed and homogenized, as well as the neutralization and mixing in the chemical process.
After using the mixing equipment, combined with the feed flow control system, the homogenization mixing process can be controlled online, so that the original traditional production process is further simplified, the traditional pre mixing system is removed, the production efficiency is greatly improved, and the cost of equipment and energy consumption is effectively reduced.
Rotor pump in the whole process of work can transport chemical substances or some corrosive substances, and do not have to worry about the mobile variable frequency rotor pump price will be eroded by this material, so at this stage the equipment is used a lot. But the equipment in the whole process of work is also inevitable to produce some common fault problems, if encountered a general common fault, according to the following methods to regularly check and deal with. If the working efficiency of the rotor pump is reduced, it is necessary to immediately check whether the parts of the equipment are loose. In the whole process of application of many equipment, due to the loose parts, the transportation rate of the equipment will also be reduced. In addition, once the noise problem occurs in the working condition of the equipment, the work should be stopped immediately to check whether the parts of the equipment must be moistened, and whether the swing rotor pump manufacturer or the simple maintenance must be carried out. Nowadays, with the continuous development trend of high and new technology, the working efficiency of the rotor pump has been gradually improved. However, in order to make the equipment work better, it is necessary to check the characteristics of the equipment and the working conditions of the parts on time.