+
  • Rubber rotor pump3-1.jpg

FGS Rubber Rotor Pump

Artículo No.:

HLS-G003


Resumen

The built-in wear-resistant lining plate in the pump cavity can effectively protect the pump cavity from wear, prolong the service life of the pump and reduce the later use cost. It can be maintained online, and the parts can be checked or replaced by opening the pump cover.

Palabras Clave: Bomba Lobular Rotativa

TEL/Whatsapp/Wechat:


Detalle del producto


  • Description
  • Performance
  • Parameters
    • Nombre del producto: FGS Rubber Rotor Pump
    • Código de producto: HLS-G003

    The built-in wear-resistant lining plate in the pump cavity can effectively protect the pump cavity from wear, prolong the service life of the pump and reduce the later use cost. It can be maintained online, and the parts can be checked or replaced by opening the pump cover.

    Product features:

    The built-in wear-resistant lining plate in the pump cavity can effectively protect the pump cavity from wear, prolong the service life of the pump and reduce the later use cost. It can be maintained online, and the parts can be checked or replaced by opening the pump cover. There is no need to lift the equipment and remove the pump from the pipeline. It is convenient for maintenance and saves a lot of maintenance time. The spiral rotor runs smoothly with stable pressure and flow. Compact structure, small floor area, easy to install and transport pipeline routing. It can realize the mixed transportation of gas, liquid and solid. Such as massive materials, fibers, hair, etc., will not block. The pump can rotate forward and backward, the inlet and outlet can be interchanged, and the two functions of loading and unloading can be realized at the same time. It can transport medium with viscosity ≤ 2 million CP. It has strong self-priming ability, and the suction range can reach 8.5 meters. Independent seal cavity design, keep the seal face lubrication, idle for 15 minutes will not produce any damage to the pump. The rotor and pump body can be made of corresponding materials according to different conveying conditions.

     

    HLS


    Application fields:

    Environmental protection: municipal sewage, chemical wastewater, lime slurry, precipitated sludge, thickened sludge, etc.

    Petrochemical Industry: heavy oil, heavy oil, source oil, fuel oil, lubricating oil, asphalt, sludge, oil, catalyst, multicomponent oil, etc.

    Papermaking: polyacrylic size, sizing solution, rosin size, paper, coating, amine emulsion, defoamer, filter aid, water treatment chemicals, etc.

    Food: dairy products, fruit juice, puree, concentrated juice, cream, syrup, chocolate, ice cream, condensed milk, condiment, distiller's grains, soybean protein, mushroom powder, etc.

    Daily chemical products: AES, MES, AOS, Las, K12, glycerin, fatty alcohol, detergent, facial cleanser, shower gel, shampoo, toothpaste, soap, detergent slurry, etc.

    Fine chemicals: dyes, pigments, sodium, adhesives, silicone oil, leather oil, emulsion explosives, etc.

    Chemical fiber: glass fiber, viscose paste, PVA, vinylon size, refined fiber size, spandex size, polymer chip, man-made fiber, etc.

    Pharmaceutical: ointment, extract, medicine emulsion, pill paste, medicament and so on. Coating: paint, paint, ink, resin, additives, organic solvents, etc.

    Fire fighting: foam pump and fire pump.

     

    HLS

  • Pay attention to the storage of cycloidal rotor pump in daily application. The electric oil well pump should be placed in the dry, clean and natural environment without corrosion of steam body. Store each part and replace the same parts. When dismantling and inspecting the high viscosity rotor pump, store each part. Pay attention to the explosion-proof surface of the explosion-proof parts, which can not be damaged. Calendering includes insulating layer, gasket and waterproof sleeve. If damaged, replace the same parts on the shelf. Do not use the substitute raw materials less than the characteristics of the raw materials or the parts that do not meet the original specifications and models, When installing, all parts should be installed according to the original position, which can not be ignored. The stainless steel plate rotor pump is often greased, and the electric oil barrel pump is operated at high speed, so the grease is easy to evaporate, so it is necessary to keep the lubrication at the rolling bearing clean, and pay attention to the replacement. The high viscosity rotor pump should be inspected and overhauled frequently, and the electric oil barrel pump should be inspected and overhauled frequently. It is necessary to check the power plug: whether the internal wiring, power plug and power switch are good, whether the insulation resistance is normal, whether the brush tailstock is loose, whether the motor rotor and carbon brush touch well, and whether the stator winding of synchronous motor winding is moderately short circuited, Rolling bearings and rotating parts are not damaged by these. Pay attention to the insulation resistance of the high viscosity rotor pump. For the long-term idle pump or the electric pump used in wet and cold natural environment, be sure to accurately measure the insulation resistance of the winding with a 500 meter before application. If the insulation resistance between the winding and the motor shell is lower than 7, the winding must be dry.

  • HLS


PRODUCTOS PRINCIPALES

EXPLORA NUESTRA LÍNEA DE PRODUCTOS


图片名称

Rotary Lobe Pump

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Aprende más +
图片名称

Rotary Lobe Pump

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Aprende más +
图片名称

Rotary Lobe Pump

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Aprende más +
图片名称

Rotary Lobe Pump

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Aprende más +

Mensaje en línea


Gracias por su atención a Helsh-Tech, si tiene algún comentario o sugerencia, por favor déjenos un mensaje.

Enviar